Dust screens for concrete plants, crushing yards, and earthworks contain sand, aggregates, and fine dust within the site. Dexcon installs rigid dust screens and dust walls made of technical textile around storage boxes, crushing plants, and silos, calculated for the local wind load and tensioned with aluminum tension profiles on a galvanized steel structure.
A concrete plant works with open storage of sand, gravel, and aggregates every day. A crushing yard grinds rubble and stone into new material, and during earthworks, raw materials lie in piles on the site for weeks. Every time a shovel loads or a rubble crusher operates, dust is released. The wind carries that dust to the neighbors and onto the public road.
Across Europe, companies that store, handle or process dust-sensitive materials are expected to limit diffuse dust emissions, meaning dust that escapes into the air without passing through a chimney or filter. The exact rules, however, differ by country and region. Which measures apply to your site depends on local legislation, the conditions of your environmental permit, the type of material and the activity on site. Your local authority or permitting body is the best place to find out what is required for your situation.
Two examples from our home markets:
Whatever the local rules, wind plays a major role: the harder it blows over storage piles and open work zones, the more dust is carried off site. Dexcon’s dust and wind screens tackle the problem at the source.
Solid screens are stretched between the columns around storage boxes or a silo structure. The technical textile allows some of the air to pass through, slowing the wind above the piles and causing the dust to settle within the zone. Dust remains contained, while light and ventilation remain accessible. A fully closed wall keeps air turbulence inside, while a dust screen provides an escape route for thermals and allows the dust to settle.
At a crushing yard, dust rises high, at the outlet of the crusher and above the conveyor belts.. A dust wall with a bend at the top provides extra wind breaking and collects extra dust at the top edge. The design is determined after an analysis of the wind direction and air currents on the site. At demolition sites close to residential areas, noise often plays a role as well. For this, Dexcon installs sound barriers in panels, as a supplement to dust control.
Sand and aggregates with varying moisture content influence the water-to-cement ratio in the concrete. industrial canopy in technical textiles keeps rain away from storage zones and loading points. For wide entrances to warehouses or boxes, bridge mammoth gates openings up to eighteen meters wide, in a design that breaks 90 percent of the wind or completely closes the opening.
Each site has a different orientation, wind direction, and arrangement of heaps and installations. We therefore start with an on-site technical analysis, including a 3D survey of the site and a wind load calculation. Based on this, the galvanized steel structure is dimensioned and the technical textile is tensioned using aluminum tension profiles. This uniform tension limits wear and extends the lifespan of the fabric, even in strong winds on open terrain.
Fixed dust screens around the storage boxes and the loading zone break the wind over sand and aggregates, causing the dust to settle within the site. Additionally, an industrial canopy keeps the aggregates dry. Which solution works best depends on the wind direction and the layout of the boxes.
We determine the height after an analysis of the site, based on the height of the crusher, the conveyor belts, and the piles, as well as the local wind load. A dust wall with a bend at the top provides additional wind breaking and dust capture.
There is no single rule that applies everywhere. Most countries and regions require companies to limit diffuse dust emissions, but the specific measures depend on local legislation, the conditions of your environmental permit, the type of material and the activity on site. Dust screens are one of several possible measures. Your local authority or permitting body can tell you what is required for your site.
In Flanders, diffuse dust emissions are regulated by Vlarem II, Section 4.4.7. The measures a crushing site must take follow from these regulations and from its environmental permit, and depend on the dust category of the materials, the sector and the activity.
In the Netherlands, diffuse dust emissions are regulated by the Environmental Activities Decree (Bal) under the Environment and Planning Act. Companies must apply best available techniques (BAT). The required measures follow from these rules, the environmental permit and possibly the municipal environmental plan, and depend on the dust class of the materials and the activity.
Keeping at a shipyard with a fixed shed fixed screens the wind out of the hall. If that warehouse has to be open one moment and closed the next, then give adjustable sides you that freedom. You store sand and aggregates that need to be kept covered in a ventilated shed , where the air continues to circulate above the piles. Those who recycle materials off the construction site can read more on the sector page. recycling , and for larger production sites, there is the sector page industry.